Side-lit COB led strip 4mm 378 leds/m 500 Lumens/m
Ref : COB378LAT [#137]
€74.17
5 meter COB led strip, 24V, 378 leds/m, 500 Lumens/m, 3 mm wide
- Side scattering of light
- 378 leds/m for uniform light distribution
Accessories to compose your kit
Led strips accessories
Transformer for 24V 5A 120W led strips on terminal block |
|
|
Led dimmer with remote control Radio frequency 12A |
Led dimmer with 144W remote control |
|
DMX led controller for white or single color led strips, spotlights and spotlights |
1 channel DMX led controller for white or single color led strip |
Products guaranteed for 3 or 5 years
Satisfied or refunded
Return within 14 days
Characteristics - Selection criteria
| Ultra-low consumption : | No |
| Type of lighting : | Atmosphere and decor |
| Color : | White |
| Voltage : | 24V |
| Waterproof : | Not waterproof |
| Strip type : | Single color |
| Lighting direction : | Side view |
This lateral lighting COB led strip allows you to create a light decoration with equal distribution of light over its entire length.
The advantage of this headband with lighting on the side, is that it can be bent to form any shape, which is not possible with the strips with lighting frontal.
Less rigid than a flexible neon, it will position itself more easily and accept tighter angles in curves.
It can be used for a discreet decoration of fine light (3 mm), to highlight an object, a mirror, or for markup.
The only 3mm wide strip is powered by 24V DC and can be cut every 55mm.
Not waterproof, it can only be used indoors.
Compose your kit ready to use
Strip only |
For the ribbon to work, you must have a power supply 12V 65W minimum. If you do not already have one, you must add a power supply to the essential accessories. Otherwise, you can acquire the ribbon alone. |
Power supply kit + ribbon + |
Minimal kit to make your led strip work. It connects to the 230V mains and the led strip to the 24V output of the power supply. Add the power supply to the list of accessories. |
Kit power supply + drive + ribbon +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + Wifi dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + DMX dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
LTech brand controller intended for professionals for intensive and long-lasting use. |
Hardware guaranteed for 3 years.
| Power supply voltage | 24V DC |
| Led type | COB. Side lighting (on the side) |
| Number of leds per meter | 378 |
| Colors | Natural white 4000K Warm white 2700K, cool white 6500K |
| Brightness | 500 to 550 Lumens per meter |
| Efficacy | 50 Lumens per Watt |
| Consumption | 10W per meter |
| Dimmable | Yes (PWM) |
| Attenuation | 2% after 6000 hours |
| CRI | 92 |
| Illumination angle | 120° |
| Lifespan | 50000 hours (at 45°C) |
| Sealing | Not waterproof IP20 |
| Dimensions | 5000x10x3mm |
| Cut | Every 55mm |
| Temperature range | -25 to 45°C |
| PCB | 1oz (35u) copper |
| Adhesive | 3M VHB |
| Certifications | CE, RoHS EN55015:2013/A1:2015 EN61547:2009 EN61000-3-2:2014 EN61000-3-3: 2013 |
| Warranty | 3 years |
Wiring white and single color ribbons
These headbands, the simplest, have only 2 wires (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.
They can be paired with a dimmer to turn on, off and vary the brightness with a remote control.
With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.
To overcome this, it is possible to arrange several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or the controller.
Here is the wiring diagram of multiple strips with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.
Precautions to take when handling and installing a led strip
The led strips can be curved lengthwise by describing a minimum radius of 5 cm.
Under no circumstances can they be folded sideways.
If you need to make 90° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by welding flexible cable (flat cable) between the 2 sections.
Do not bend the led strips or distort them:
Choosing a led strip
How to choose the best led strip for your needs?
To quickly and easily find the led strip that will best suit
your lighting project, consult our guide
Front and side lighting
What is the difference between front and side lighting?
To quickly and easily find the LED strip that best suits
your lighting project, consult guide to led strips with front and side lighting
Reviews (0)
Viewed products
5 meter COB led strip, 24V, 378 leds/m, 500 Lumens/m, 3 mm wide
- Side scattering of light
- 378 leds/m for uniform light distribution