Wedoo Led: Manufacturer of led lighting devices since 2009

Lighting manufacturer led

Wedoo Led is not a simple reseller like many merchant sites on the web.
We have been manufacturing led lighting devices since 2009.

  • Led strips
  • Indoor led spotlights
  • Built-in or submersible led spotlights for gardens, ponds and swimming pools
  • Classic and ultra-low consumption led projectors
  • Industrial led lighting with tri-proof tubes, also available in ultra-low consumption
  • Conventional or ultra-low-consumption high-brightness Hi-bay lighting
  • Track light
  • Public lighting Ultra-low consumption

Our manufacturer status and our experience allow us to offer you a 3 to 5 year warranty on all our products.

"Realisation

Some projects require a specific type of lighting that is not always found on the market.

Wedoo Led can rigorously study your needs and offer you a fully adapted solution by manufacturing your custom lighting device.
It could be :

  • led strips with special lighting or personalized dynamic effects
  • headlights with individual beam angle, color temperature and light output
  • spotlights with bespoke control and features

The study and the realization of personalized led lighting is our job.

Certifications and standards

certification_et_normes. jpg

Before being placed on the market, all of our strips, spots, projectors and LED bulbs are submitted to certification bodies to undergo complete laboratory tests.

When you buy from Wedoo Led, you will receive all the certificates as well as the test reports relating to the products ordered.

All our items comply with the following standards:

  • CE
  • RoHS
  • EN 60598-2-20:2015
  • EN 60598-1:2015
  • EN 62471:2008
  • EN 62493:2015
  • EN 62031:2008 +A1:2013 +A2:2015

certification_and_standards. jpg

We have all the necessary compliance documents at your disposal:

  • CE Certificates
  • RoHS Certificates
  • Laboratory test reports

Note that many manufacturers are not up to date with certification, in particular the European standard EN62471 relating to photobiological risks applicable to all lighting devices.
This standard ensures the safety of the use of a light device with regard to the emission of ultraviolet and infrared radiation to the skin, cornea, conjunctiva, pupil and retina of the eye.

All of these standards are mandatory. Make no mistake when sourcing led lighting.

A quality of LED lighting suitable for all types of projects

Wedoo Led lighting, quality products suitable for all types of projects

From the simple lighting of a room to the lighting of a public building or a stadium, Wedoo Led will meet your needs, in all circumstances.

The quality of LED-based lighting is characterized by the level of luminosity in relation to its consumption, its lifespan and its rate of attenuation over time.
Our lighting devices all meet high quality criteria, ensuring particularly durable use and close to excellence for all types of projects, whatever their size.

Brightness

Here is the comparison of an SMD 5050 led strip among the 4 classes available on the market:

Quality Brightness by led (white color)
Wedoo Led and Professional 18 to 20 Lumens
Standard 14 to 16 Lumens
Entry level 10 to 13 Lumens
First prize 8 to 10 Lumens

Attenuation

Attenuation is an important consideration, as it defines the longevity of the ribbon in terms of brightness over a period of time.
The lower the attenuation, the better the brightness will be over time.

The values ​​expressed in the following table correspond to the attenuation rate after 3000 hours of operation:

Quality Attenuation (25°C)
Wedoo Led and Professional 5 to 7%
Standard 8 to 10%
Entry level 10 to 15%
First prize 30%

Attenuation of a Wedoo Led strip after 3000 hours of operation

Here is an example of attenuation for an SMD 5050 Wedoo Led strip:

Brightness comparison of a Wedoo Led ribbon with a cheap ribbon

The following 2 images concretely show the difference in brightness between an entry-level led strip and a Wedoo Led strip.

The following images were taken by us and have not undergone any modifications or retouching.
They are published as is, so you can compare the real differences in brightness.

Comparison between a Wedoo Led ribbon and a standard ribbon

Comparison between a Wedoo Led headband and a standard headband

A team at your service, to support you in your projects

Wedoo Led customer service to support your projects

A led lighting project requires an in-depth technical study to determine your needs, taking into account the technical constraints.

This is why we provide you with a support service that will help you develop your project.

We will provide:

  • the study of your project according to the plans provided and the constraints mentioned
  • The definition of the nomenclature of the necessary equipment
  • Encryption
  • The production of an analysis report on the calculation of illumination
  • The possible development of a simulation (depending on the project)
  • Tracking up to the preparation, shipping and delivery of your order
Study of plans to support your projects

Study of plans and desired lighting

The first step is to send us your carefully detailed plans,
specifying all the technical constraints, as well as the locations of the technical rooms where the power supplies, controllers, amplifiers and connection boxes will be stored.

The description of the desired lighting must be relatively precise:

  • Brightness
  • Color or shade of white
  • Multicolor fixed or with dynamic effects
  • Sealing
  • Direction of illumination

After receiving your documents, you will be offered a location proposal.

Project study, equipment nomenclature

Establishment of the detailed nomenclature of the necessary equipment and accessories

A detailed proposal is sent to you.
It contains:

  • Complete equipment list
  • Wiring and installation plan
  • Technical points requiring special attention (connections, power distribution and compliance with standards)
  • Project costing

Project study, lighting simulation
Project study, lighting simulation

Illumination calculation analysis report

A simulation of the rendering of the lighting is carried out taking into account the power and the location of the lighting devices.

The report includes:

  • An overview of brightness
  • A detailed view of illuminance slices
  • Visualization of zones with their light intensity (Lux)

Project study, simulation of illumination values

Video simulation of the final rendering

Some large projects may require a global visualization before validation.

A video simulation can be made to fully appreciate the effect obtained.
The characteristics may possibly be modified until you obtain complete satisfaction.

Example of the light animation of a bridge with dynamic effects controlled by DMX.
See the video on the left.