Flat cable 20AWG 0.5mm² for led strip

20AWG 0.5mm² flat cable for led strips Flat cable sold by the meter for led strip connections and board/cable quick connectors

20AWG flat cable sold by the meter with a 0.5 mm² section for LED strip connections.

Choose the number of conductors according to the type of led strip used:

• - 2 conductors for single color ribbons. The wires will be red for the + and black for the -.
• - 3 conductors for variable white tapes (CCT). The wires will be white for cold white, yellow for warm white and black for +.
• - 4 conductors for RGB (multicolored) ribbons. The wires will be red for red, green for green, blue for blue and black for +.
• - 5 conductors for RGBW ribbons (multicolored + white). The wires will be red for red, green for green, blue for blue, white for white and black for +.
• - 6 conductors for RGB+CCT ribbons (multicolor + variable white). The wires will be red for red, green for green, blue for blue, white for cold white, yellow for warm white and black for +.

Always check that the section of the cable is sufficient for your installation (amperage used and cable length).
If you have any doubts, do not hesitate to ask us for advice.

This cable is compatible with Board/cable solderless quick connectors.

It is not suitable for lengths of more than 5 meters of led strips, as well as for powerful and ultra-powerful ribbons.