RGB led controller with 10A remote control
Ref : CTRLRGBFUT025 [#20]RGB led controller with 10A Radio frequency remote control
Accessories to compose your kit
Accessoires controleurs
Products guaranteed for 3 or 5 years
Return within 14 days
Characteristics - Selection criteria
Strip type : | Multicolor (RGB) |
Controller type : | With remote control |
RF 2.4 GHz | |
Multi zones : | No |
Voice assistants : | No |
Controller for 12 and 24V RGB led strips.
Not suitable for RGBW, RGB + variable white and Magic strips .
The remote control works over a distance of 30 meters (in free field) and passes through walls.
It allows you to turn on, off, vary the brightness and change the colors (including white) of your lighting thanks to its touch wheel.
It allows the use of automatic modes such as color jumps and variations with color gradients, at variable speed.
The controller can be coupled with a switch because it memorizes the state in which it was before the shutdown. On re-ignition, the intensity and color of the lighting will be the same.
The receiver unit is not waterproof and must be used away from splashing water or excessive humidity.
If the power of your lighting device exceeds that of the controller, it is possible to use multiple receivers or use RGB amplifiers.
Input voltage | 12 or 24V DC |
Output voltage | 12V or 24V DC |
Output current | 10A max |
Power | 120W max in 12V, 240W max in 24V |
Sealing | Not waterproof IP20 |
Signal | Radio frequency 433 MHz |
Distance | 30 meters in open field |
Remote control power supply | 2 AAA batteries (not included) |
Dimmer dimensions | 85 x 45 x 22.5 mm |
Remote control dimensions | 110 x 53 x 20.5 mm |
Temperature range | -20 to 60 ° C |
Weight | 150 grams |
Certifications | CE, RoHS |
Guarantee | 3 years |