RGBW led controller with 10A remote control

Controller for 12 and 24V RGBW led strips.
Not suitable for RGBW, RGB + variable white and Magic strips .

The remote control works over a distance of 30 meters (in free field) and passes through walls.
It allows you to turn on, off, vary the brightness and change the colors and white brightness of your lighting thanks to its touch wheel.

It allows the use of automatic modes such as color jumps and variations with color gradients, at variable speed.

The controller can be paired with a switch because it memorizes the state it was in before the shutdown. When re-ignited, the intensity and color of the lighting will be the same.

The receiver unit is not waterproof and must be used away from splashing water or excessive humidity.

If the power of your lighting device exceeds that of the controller, it is possible to use multiple receivers or use RGBW amplifiers.

If you wish to use this controller via Wifi, in addition to the remote control, while benefiting from control by Google and Alexa voice assistants, you can add the Wifi adapter present in the list of accessories.
A single Wifi adapter can control several controllers, i.e. your entire light device.

RGBW controller manual FUT027