Multicolored led strip with dynamic effects 60 leds/m - 1 led/pixel

Multicolored RGB led strip with dynamic effects (Magic) allowing you to create a colorful atmosphere with active animations.
It allows you to obtain rainbow effects with gradients, chases, scrolls and a whole host of other animations.
Depending on the controller used, you can make the ribbon react to the rhythm of the music, and even program your own animations, à la carte.

This model is controlled by led (1 led per pixel) and gives smoother and more precise animations than the strips with 3 leds per pixel.

The strip requires the use of a specific controller for Magic led strips.

The tape is not waterproof and can only be used indoors, excluding wet rooms (kitchens, bathrooms).

The 10mm wide strip is powered by 12V DC and can be cut every 100mm.

Led strips of 5 meters can be chained together using the clip connectors provided. The animation will extend over the total length of the connected strips, with however the limitation of the number of pixels managed by the chosen controller (see the characteristics of the controller according to your total length of strips).

Important: Be sure to supply each 5-meter strip with 12V (by connecting them directly to the power supply) independently of the controller. See login photo.

Compose your kit ready to use

Strip only	For the ribbon to work, you must have a power supply 12V 45W minimum. If you do not already have one, you must add a power supply to the essential accessories. Otherwise, you can acquire the ribbon alone.
Power supply kit + ribbon +	Minimal kit to make your led strip work. It connects to the 230V mains and the led strip to the 12/24V output of the power supply. Add the power supply to the list of accessories.
Power supply kit + controller + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dynamic effects controller 300 programs with remote control You will get a complete kit that comes with a remote control to turn on, off and dim the light intensity and change the animations.
Power supply kit + Wifi dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 Wifi dynamic effects controller with remote control With this complete kit, you can turn on, turn off, vary the light intensity, select animations, compose your programs, operate the tape to the rhythm of the music, with the remote control, in Wifi or with Google and Alexa voice assistants.
Power supply kit + DMX dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 DMX controller for led strip with dynamic effects Complete kit operating in DMX (excluding console). The DMX controller allows you to control the LED strip, pixel by pixel, in order to obtain à la carte animations, according to the DMX sequences programmed on your console. 3 channels are required to drive a single pixel, or 90 channels per meter for this ribbon. LTech brand controller intended for professionals for intensive and durable use.

Choosing a led strip

 

How to choose the led strip best suited to your needs?

To quickly and easily find the led strip that best suits
your lighting project, consult our guide