Multicolored led strip with dynamic effects 30 leds / m - 1 led / pixel - Waterproof

Multicolored RGB led strip with dynamic effects (Magic) to create a colorful atmosphere with active animations.
It allows you to obtain rainbow effects with gradients, chasers, scrolls and a whole multitude of other animations.
Depending on the controller used, you can make the ribbon react to the rhythm of the music, and even program your own animations, à la carte.

This model is led by led (1 led per pixel) and gives smoother and more precise animations than bands with 3 leds per pixel.

The strip requires the use of a specific controller for Magic LED strips.

The tape is waterproof and can be used outdoors, outside swimming pools, pools and jacuzzi.

The 10mm wide strip is powered by 12V DC and can be cut every 100mm.

Led strips of 5 meters can be chained between them thanks to the supplied clip connectors. The animation will extend over the total length of the connected strips, with however the limitation of the number of pixels managed by the chosen controller (see the characteristics of the controller according to your total length of strips).

Important: Be sure to supply each 5 meter ribbon with 12V (by connecting them directly to the power supply) independently of the controller. See the connection photo.

Compose your ready-to-use kit

Ribbon only	For the ribbon to work, you must have a minimum 12V 45W power supply . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own.
Power supply + ribbon kit +	Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 12 / 24V output of the power supply. Add the power supply in the list of accessories.
Power supply + controller + ribbon kit + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dynamic effects controller 300 programs with remote control You will get a complete kit supplied with a remote control to turn on, off and vary the light intensity and change the animations.
Power supply kit + Wifi dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 WiFi dynamic effects controller with remote control With this complete kit, you will be able to turn on, off, vary the light intensity, select the animations, compose your programs, operate the ribbon to the rhythm of the music, with the remote control, in Wifi or with Google and Alexa voice assistants.
Power supply kit + DMX dimmer + ribbon + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 DMX controller for dynamic effect led tape Complete kit working in DMX (except console). The DMX controller allows you to control the led strip, pixel by pixel, in order to obtain à la carte animations, according to the DMX sequences programmed on your console. 3 channels are needed to drive a single pixel, or 90 channels per meter for this ribbon. LTech brand controller intended for professionals for intensive and durable use.

Choosing a led strip

 

How to choose the led strip best suited to your needs?

To quickly and easily find the led strip that best suits
your lighting project, consult our guide