Long length LED strip from 5 to 20 meters for lighting 120 LEDs/m 960 Lumens/m

Ref : LONGWHITE [#177]

Rating: Sign in to write a review

€55.00

Tax excluded

5 to 20 meter reel
No limitation to 5 meters
1 single power cable up to 20 meters of ribbon

Color

Cool white
Pure white
Warm white

Sealing

Length

Quantity

On demand. Shipping 20 to 30 days.

Products guaranteed for 3 or 5 years

Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria

Ultra-low consumption :	No
Type of lighting :	Lighting
Color :	White
Voltage :	24V
Waterproof :	Not waterproof
	Waterproof IP65
Strip type :	Single color
Lighting direction :	Front view

LED strip from 5 to 20 meters SMD2835 24V 120 leds/m 960 Lumens/m

LED strip for main lighting in a living room, bedroom or office.
This LED strip can also be used for store displays.

For optimal results, it is preferable to opt for indirect lighting (lighting towards the ceiling) to avoid glare.
Indirect light is also much more comfortable and adds a touch of modernity to your home.

The strip is powered by 24V DC and can be cut in groups of 6 LEDs, every 5 cm.

Unlike classic LED strips that need to be powered every 5 meters, this model allows you to use only one cable for a length of up to 20 meters of LED strip.
If there are multiple sections, they can be connected in series for easier and faster installation.

Choose the waterproofing

IP20Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), excluding kitchens and bathrooms.
IP65Resistant to water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.
IP68Submersible. Can be used in swimming pools, SPAs or ponds.

Equipment guaranteed for 5 years intended for professionals and individuals for intensive use.

Power supply voltage	24V DC
LED type	SMD 2835
Number of LEDs per meter	120
Colors	Natural white 5000K Warm white 3000K, cool white 6000K.
Brightness	960 Lumens per meter (in cool white) 910 Lumens per meter in natural white 880 Lumens per meter in warm white
Efficiency	100 Lumens per Watt
Power consumption	9.6W per meter
Dimmable	Yes (PWM)
Attenuation	2% after 6000 hours
CRI	80

Beam angle	120°
Lifespan	50000 hours (at 45° C)
Waterproofing	IP20 or IP65
Dimensions	Lengths of 5, 10, 15 or 20 meters. Width 12 mm, thickness 1.6 mm in IP20, 3 mm in IP65
Cutting	Every 5 cm
Temperature range	-25 to 45° C
PCB	1 oz (35u) copper
Adhesive	3M VHB
Certifications	CE, RoHS EN60598-2-20:2015 EN 60598-1:2015 EN 62471:2008 EN 62493:2015 EN 62031:2008 +A1:2013 +A2:2015
Warranty	5 years

Wiring of white and single color strips

These strips, the simplest ones, have only 2 wires (+ and -).
They can be connected directly to the 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.

They can be coupled with a dimmer to turn on, turn off and adjust the brightness with a remote control.

The strips can have a maximum length of 20 meters.
Beyond this length, there would be a loss of light intensity after the first 20 meters.

To overcome this, it is possible to arrange several lengths of 20 meters (or less), one after the other, by connecting them in parallel to the power supply or controller.

Here is the wiring diagram for multiple strips using a dimmer. The latter will act on all strips, including those connected after the amplifier.

Connection of 2 LED strips in parallel with amplifier

Precautions to take when handling and installing an LED strip

LED strips can be curved lengthwise with a minimum radius of 5 cm.
They cannot be folded laterally under any circumstances.

If you need to make 90° angles, it is imperative to cut the strip into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.