Ambient led strip 60 leds / m 320 Lumens / m submersible IP68
Ref : S1C3528-60-IP68 [#29]
€33.69
5 meter led strip SMD3528 12V 60 leds / m 320 Lumens / m submersible IP68
Accessories to compose your kit
Led strips accessories
Transformer for led strips 12V 4A 48W on socket |
|
|
Led dimmer with remote control Radio frequency 12A |
Led dimmer with 144W remote control |
|
DMX led controller for white or single color led strips, spotlights and spotlights |
1 channel DMX led controller for white or single color led strip |
Products guaranteed for 3 or 5 years
Satisfied or refunded
Return within 14 days
Characteristics - Selection criteria
| Ultra-low consumption : | No |
| Type of lighting : | Atmosphere and decor |
| Color : | White |
| Single color | |
| Voltage : | 12V |
| Waterproof : | Submersible IP68 |
| Lighting direction : | Front view |
This economical led tape provides lighting of 320 Lumens per meter in white.
It is intended for the mood lighting of a modern basin , jacuzzi or bathtub.
You can easily achieve your light atmosphere in white, or in a single color with this led strip.
The strip is supplied with 12V DC and can be cut in groups of 3 LEDs, or every 5 cm.
Its IP68 waterproofing allows it to be submerged and is resistant to chlorine and salt water.
If the tape has to be cut, make sure it is completely watertight, for example using a special swimming pool silicone.
Its very low voltage in 12V allows the use of this led tape in swimming pool.
Compose your ready-to-use kit
Ribbon only |
For the ribbon to work, you must have a 12V 30W minimum power supply . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own. |
Power supply kit + ribbon + |
Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 12 / 24V output of the power supply. Add the power supply to the list of accessories. |
Power supply kit + dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + Wifi dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + DMX dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
LTech brand controller intended for professionals for intensive and durable use . |
Choose waterproofing
IP20 Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), except kitchens and bathrooms.IP65 Resistant to water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.
IP68 Submersible. Can be used in swimming pools, SPA or ponds.
Equipment guaranteed for 5 years intended for professionals and individuals for intensive use.
| Supply voltage | 12V DC |
| Led type | SMD 3528 |
| Number of leds per meter | 60 |
| Colors | Natural white 4000K Warm white 2700K, cold white 6000K red, green, blue, yellow. |
| Brightness | 320 Lumens per meter (in white) |
| Efficiency | 66 Lumens per Watt |
| Consumption | 4.8W per meter |
| Dimmable | Yes (PWM) |
| Mitigation | 2% after 6000 hours |
| SHOUT | 80 |
| Illumination angle | 120 ° |
| Lifetime | 50,000 hours (at 45 ° C) |
| Sealing | IP68 |
| Dimensions | 5000 x 10 x 5 mm |
| Cutout | Every 5 cm |
| Temperature range | -25 to 45 ° C |
| PCB | 1 oz (35u) copper |
| Adhesive | 3M VHB |
| Certifications | CE, RoHS EN55015: 2013 / A1: 2015 EN61547: 2009 EN61000-3-2: 2014 EN61000-3-3: 2013 |
| Guarantee | 5 years |
Wiring of white ribbon with single color
ribbonsThese headbands, the simplest, only have 2 threads (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.
They can be coupled to a dimmer to turn on, off and vary the brightness with a remote control.
With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.
To overcome this, it is possible to have several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or to the controller.
Here is the wiring diagram of several bands with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.
Precautions to be taken when handling and installing an led tape
The led strips can be bent lengthwise by describing a radius of at least 5 cm.
Under no circumstances can they be folded sideways.
If you have to make 90 ° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.
Do not bend the led strips or subject them to distortion:
Choosing a led strip
How to choose the led strip best suited to your needs?
To quickly and easily find the led strip that best suits
your lighting project, consult our guide
Reviews (0)
Viewed products
5 meter led strip SMD3528 12V 60 leds / m 320 Lumens / m submersible IP68