ZIG ZAG led strip 60 leds / m 1120 Lumens / m for sign lighting
Ref : SHAP2835-60-IP20 [#95]5 meters ZIG ZAG led strip sideways foldable SMD2835 12V 60 leds / m 1120 Lumens / m not waterproof IP20
Accessories to compose your kit
Led strips accessories
|
|
Products guaranteed for 3 or 5 years
Return within 14 days
This ribbon can be folded sideways, which allows backlighting of illuminated signs by conforming to the shape of the letters.
It can be used for any decoration describing non-linear shapes.
With a brightness of 1120 Lumens per meter, the strip is powerful enough for a sign visible from afar.
The strip is powered by 12V DC and can be cut in groups of 3 LEDs, or every 5 cm.
Not waterproof, it can be used indoors, or in a completely waterproof sign.
Compose your ready-to-use kit
Ribbon only |
For the ribbon to work, you must have a minimum 12V 180W power supply . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own. |
Power supply + ribbon kit + |
Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 12V output of the power supply. Add the power supply in the list of accessories. |
Choose waterproofing
IP20 Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), except kitchens and bathrooms.IP65 Resists water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.
IP68 Submersible. Can be used in swimming pools, SPA or ponds.
Supply voltage | 12V DC |
Type of led | SMD 2835 |
Number of leds per meter | 60 |
Colors | Natural white 5000K Warm white 3000K, cold white 7000K red, green, blue, yellow, pink, purple, orange. |
Brightness | 1120 Lumens per meter (in cool white) |
Efficiency | 93 Lumens per Watt |
Consumption | 12W per meter |
Dimmable | Yes (PWM) |
Attenuation | 2% after 6000 hours |
CRI | 80 |
Lighting angle | 120 ° |
Lifetime | 50,000 hours (at 45 ° C) |
Waterproofing | Not waterproof IP20 |
Dimensions | 5000 x 8 x 1.5 mm |
Cutout | Every 5 cm |
Temperature range | - 25 to 45 ° C |
PCB | 1 oz (35u) copper |
Adhesive | 3M VHB |
Certifications | CE, RoHS EN 60598-2-20: 2015, EN 60598-1: 2015, EN 62471: 2008, EN 62493: 2015, EN 62031: 2008 + A1: 2013 + A2: 2015 |
Guarantee | 3 years |
Wiring of white ribbon with single color ribbons
These headbands, the simplest, only have 2 threads (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.
They can be coupled to a dimmer to turn on, off and vary the brightness with a remote control.
With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.
To overcome this, it is possible to have several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or to the controller.
Here is the wiring diagram of several bands with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.
Precautions to be taken when handling and installing an led tape
The led strips can be bent lengthwise by describing a radius of at least 5 cm.
Under no circumstances can they be folded sideways.
If you have to make 90 ° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.
Do not bend the led strips or subject them to distortion:
Choosing a led strip
How to choose the led strip best suited to your needs?
To quickly and easily find the led strip that best suits
your lighting project, consult our guide