Ultra powerful COB LED strip - 5000 Lumens/m - 1600 LEDs/m

Ref : COB1600 [#172]

Rating: Sign in to write a review

€81.67

Tax excluded

Very high brightness: 5000 Lumens per meter
COB technology: 1600 LEDs per meter without dot effects
Efficiency of 125 Lumens per Watt

Color

Cool white
Pure white
Warm white

Quantity

On demand. Shipping 20 to 30 days.

Accessories to compose your kit

Led strips accessories

	Transformer for led strips 24V 12.5A 300W on terminal block	Power supply 24V 12.5A 300W €24.29
	Led dimmer with remote control Radio frequency 12A	Led dimmer with 144W remote control €16.87
	Wifi adapter, Internet box and Google and Alexa voice assistants for Mi-light and Futlight controllers	Wifi adapter and Google and Alexa voice assistants €20.00
	DMX led controller for white or single color led strips, spotlights and spotlights	1 channel DMX led controller for white or single color led strip €25.00
	WIFI + Bluetooth + RF 2.4 GHz 15A receiver. Works with white, single color, RGB, RGBW and RGB+CCT headbands.	15A WIFI + RF controller for 1 color led strips, variable white, RGB, RGBW and RGB+CCT €21.67

Products guaranteed for 3 or 5 years

Satisfied or refunded

Return within 14 days

Characteristics - Selection criteria

Ultra-low consumption :	No
Type of lighting :	Ultra bright
Color :	White
Voltage :	24V
Waterproof :	Not waterproof
Lighting direction :	Front view

This ribbon is currently the most powerful on the market.

It provides intense lighting of 5000 Lumens per meter.
It is used to illuminate theater stages, halls with high ceilings, shopping centers, or museums.

For optimal results, it is preferable to opt for indirect lighting (lighting towards the ceiling or on the sides) to avoid glare.

It uses high-density COB technology: 1600 LEDs per meter. This allows for continuous lighting without point effects.

The strip is powered by 24V DC and can be cut every 2.5 cm.

Despite its high brightness, it remains economical thanks to its efficiency of 125 Lumens per Watt.

Not waterproof, it can only be used indoors.

Compose your ready-to-use kit

Strip only	For the strip to work, you must have a 24V 240W minimum power supply. If you don't already have one, you must add a power supply to the essential accessories. Otherwise, you can purchase the strip alone.
Power supply + strip kit +	Minimal kit to operate your LED strip. It connects to the 230V mains and the LED strip to the 24V output of the power supply. Add the power supply to the list of accessories.
Power supply + dimmer + strip kit + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dimmer with remote control You will get a complete kit supplied with a remote control to turn on, turn off, and vary the light intensity using the radio frequency remote control.
Power supply + Wifi dimmer + strip kit + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 dimmer with remote control - 1 Wifi adapter With this complete kit, you can turn on, turn off, and vary the light intensity via Wifi using your phone or tablet.
Power supply + DMX dimmer + strip kit + +	To compose this kit, you must add to the accessories: - 1 power supply - 1 DMX dimmer Complete kit working with DMX (console not included). The DMX controller allows you to turn on, turn off, and vary the light intensity according to the signal sent by your DMX console. Only 1 channel is needed to control the LED strip. LTech brand controller designed for professionals for intensive and long-lasting use.

Choose waterproofing

IP20Not waterproof. Suitable for indoor use (living rooms, bedrooms, conservatories), excluding kitchens and bathrooms.
IP65Resistant to water splashes and humid environments. Can be installed in kitchens, bathrooms, or outdoors.
IP68Submersible. Can be used in swimming pools, SPAs, or ponds.

Equipment guaranteed for 3 years, designed for professionals and individuals for intensive use.

Supply voltage	24V DC
LED type	COB
Number of LEDs per meter	1600
Colors	Natural white 4500K Warm white 2700K, cool white 6500K
Brightness	5000 Lumens per meter (in cool white, 4800 Lumens in natural white and 4200 Lumens in warm white)
Efficiency	125 Lumens per Watt
Power consumption	40W per meter
Dimmable	Yes (PWM)
Light depreciation	2% after 6000 hours
CRI	80

Beam angle	120°
Lifespan	50000 hours (at 45° C)
Waterproofing	Not waterproof IP20
Dimensions	5000 x 30 x 1.6 mm
Cutting interval	Every 2.5 cm
Temperature range	-20 to 40° C
PCB	1 oz (35u) copper
Adhesive	3M VHB
Certifications	CE, RoHS
Warranty	3 years

Wiring of white and single color strips

These strips, the simplest ones, only have 2 wires (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, your home's wall switch will serve to turn the lighting on and off.

They can be coupled with a dimmer to turn on, turn off and vary the brightness with a remote control.

With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.

To overcome this, it is possible to arrange several lengths of 5 meters (or less) one after another by connecting them in parallel to the power supply or controller.

Here is the wiring diagram of multiple strips using a dimmer. The latter will act on all strips, including those connected after the amplifier.

Connexion de 2 rubans led en parallèle avec amplificateur

Precautions to take when handling and installing an LED strip

LED strips can be curved lengthwise with a minimum radius of 5 cm.
They cannot be folded laterally under any circumstances.

If you need to make 90° angles, it is imperative to cut the strip into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.