Led strip with strong lighting 240 leds / m 4000 Lumens / m not waterproof
Ref : S1C-240-IP20 [#39]
€99.92
Ultra-powerful 5 meter led strip SMD2835 24V 240 leds / m 4000 Lumens / m not waterproof IP20
Accessories to compose your kit
Led strips accessories
Transformer for led strips 24V 12.5A 300W on terminal block |
|
|
Led dimmer with remote control Radio frequency 12A |
Led dimmer with 144W remote control |
|
Wifi adapter, Internet box and Google and Alexa voice assistants for Mi-light and Futlight controllers |
Wifi adapter and Google and Alexa voice assistants |
|
DMX led controller for white or single color led strips, spotlights and spotlights |
1 channel DMX led controller for white or single color led strip |
Products guaranteed for 3 or 5 years
Satisfied or refunded
Return within 14 days
Characteristics - Selection criteria
| Ultra-low consumption : | No |
| Type of lighting : | Ultra bright |
| Color : | White |
| Single color | |
| Voltage : | 24V |
| Waterproof : | Not waterproof |
| Lighting direction : | Front view |
Led strip for intense lighting 4000 Lumens per meter.
It is used to illuminate theater stages, halls with high ceilings, shopping centers or museums.
For an optimal rendering, it is preferable to opt for indirect lighting (lighting towards the ceiling or on the sides) to avoid glare.
The strip is powered by 24V DC and can be cut in groups of 12 LEDs, or every 5 cm.
Not waterproof, it can only be used indoors.
Compose your ready-to-use kit
Ribbon only  |
For the ribbon to work, you must have a minimum 24V 300W power supply . If you don't already have one, you need to add a power supply to the must-have accessories. Otherwise, you can purchase the ribbon on its own. |
Power supply + ribbon kit  + |
Minimal kit to operate your led strip. It connects to the 230V sector and the led strip to the 12 / 24V output of the power supply. Add the power supply in the list of accessories. |
Power supply + drive + ribbon kit +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + Wifi dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
|
Power supply kit + DMX dimmer + ribbon +  + |
To compose this kit, you must add to the accessories:
LTech brand controller intended for professionals for intensive and durable use . |
Choose waterproofing
IP20 Not waterproof. Suitable for indoor use (living rooms, bedrooms, verandas), except kitchens and bathrooms.IP65 Resists water splashes and humid environments. Can be installed in a kitchen, bathroom or outdoors.
IP68 Submersible. Can be used in swimming pools, SPA or ponds.
Equipment guaranteed for 5 years intended for professionals and individuals for intensive use.
| Supply voltage | 24V DC |
| Type of led | SMD 2835 |
| Number of leds per meter | 240 |
| Colors | Natural white 5000K Warm white 3000K, cold white 7000K red, green, blue, yellow, pink, purple, orange. |
| Brightness | 4000 Lumens per meter (in white) |
| Efficiency | 83 Lumens per Watt |
| Consumption | 48W per meter |
| Dimmable | Yes (PWM) |
| Attenuation | 2% after 6000 hours |
| CRI | 80 |
| Lighting angle | 120 ° |
| Lifetime | 50,000 hours (at 45 ° C) |
| Waterproofing | Not waterproof IP20 |
| Dimensions | 5000 x 20 x 3 mm |
| Cutout | Every 5 cm |
| Temperature range | - 25 to 45 ° C |
| PCB | 1 oz (35u) copper |
| Adhesive | 3M VHB |
| Certifications | CE, RoHS EN60598-2-20: 2015 EN 60598-1: 2015 EN 62471: 2008 EN 62493: 2015 EN 62031: 2008 + A1: 2013 + A2: 2015 |
| Guarantee | 5 years |
Wiring of white ribbon with single color
ribbonsThese headbands, the simplest, only have 2 threads (+ and -).
They can be connected directly to the 12 or 24V power supply. In this case, the wall switch in your home will be used to turn the lighting on and off.
They can be coupled to a dimmer to turn on, off and vary the brightness with a remote control.
With the exception of certain models (specified in the product sheet), LED strips can only have a maximum length of 5 meters.
Beyond this length, there would be a loss of light intensity after the first 5 meters.
To overcome this, it is possible to have several lengths of 5 meters (or less), one after the other, by connecting them in parallel to the power supply or to the controller.
Here is the wiring diagram of several bands with the use of a dimmer. The latter will act on all the ribbons, including those connected after the amplifier.
Precautions to be taken when handling and installing an led tape
The led strips can be bent lengthwise by describing a radius of at least 5 cm.
Under no circumstances can they be folded sideways.
If you have to make 90 ° angles, it is imperative to cut the tape into sections and connect them, either with a suitable angle connector, or better, by soldering flexible cable (flat ribbon) between the 2 sections.
Do not bend the led strips or subject them to distortion:
Choosing a led strip
How to choose the led strip best suited to your needs?
To quickly and easily find the led strip that best suits
your lighting project, consult our guide
Reviews (0)
Viewed products
Ultra-powerful 5 meter led strip SMD2835 24V 240 leds / m 4000 Lumens / m not waterproof IP20